Customizing the S key Tips Tricks in SolidWorks

Press the S key from the SolidWorks menu, we can display the Shortcut menu. Shortcut Menu we can set ourselves, what menu we want to display, to add a menu can be done by right clicking on the shortcut menu and selecting Customize. Customizing the -S- key menus. To truly maximize the efficiency of the -S- key shortcut, users can customize these menus by bringing up the -S- key menu, doing a right mouse button on the menu, and choose customize.

This menu shortcut can be used for parts, assembly or drawing. In the sketch command, each sketch tool has several types, for example rectangle, there are several methods for making rectangles, circles, slots, etc. To change from one type of sketch tools to another, it can be done by pressing the a button. With Instant 3D, we can perform editing features dynamically by dragging the handle point from the end of the dimension or the arrow handle on the feature wall. In the sketching process, we are asked to define the plane, the Plane, where we will start the sketching process. In SolidWork2013 in general, there are 3 areas that become a reference for us in making a sketch or modeling process, namely Front, Top, Right, when we click one of the commands on the sketch toolbar, we will automatically be asked to determine the plane that is the reference In the mechanical engineering design theory this reference plane can be interpreted as a form of view of an essay object. The command display requested by the Solidwork program to determine the area of ​​the sketch image can be seen in the following figure after we determine the area of ​​the image that we will reference, so we can already start the etching process. The sketching process is divided into: Sketching in 2D format Sketching in 3D format in the etching process in 2D format we use the x-axis and y-axis references, while in the 3D format we use the x-axis, y-axis and z-axis references the etching process is always followed by the giving stages We can do the dimensions where the process of giving these dimensions can be done by filling in the dimension values ​​in the Nabager Design Tree Feature dialog box or by clicking smartdimensin on the sketch toolbar and then clicking the sketch line where you want to give the dimension value.

Berbagi :