Click Insert Features Draft Solidworks

For those who are just learning to use solidworks, there must be confusion or panic because they are not used to tilting the surface of an object, then they will immediately think that this is a difficult thing, even though it is not that difficult. that we think. A feature of the 3d application that functions to make a surface slope by using a certain angle to the surface in 3D modeling, we can enter the draft in the area we want. we can apply the draft concept to both solid and surface models.

We can determine the type of arrangement with the following methods:

Neutral plane

Neutral Plane Draft

Parting line

Draft-Step

However, maybe you are really trying to make a boss that comes out the other side of the part. These heads-up display icons enable you to do this. Options include boss, cut, and draft. The draft option enables you to add a draft to a feature created with Instant 3D.

Draft Steps

Draft Neutral Fields

We can make the selected taper model features using a neutral plane facing a certain angle,

We can also apply the concept of corners as part of a basic extrusion, top, or cut.

Neutral Field To create a concept

Click the Draft button on the features toolbar, or Insert, Feature, Draft.

In the Property Manager:

Select Neutral Plane in draft.

In Draft Angle, set the value to degrees. The draft angle is measured perpendicular to the neutral plane.

Select face or plane to Neutral plane. If necessary, select Backslash in opposite direction.

Select the face to draft in the graph area for Face, which will be created.

Using the Neutral Plane as the design type, we can design several external surfaces, all facing outward,

multiple faces on all inner faces, cross faces, or a combination of inner and outer faces.

In the Property Manager, under Faces, select Face value propagation.

Face Propagation

Selection in the Chart Area

Draft Results

There is no. Only faces are selected in the draft. The face above is used as the Neutral Field in all matters.

Throughout Tangent. Extend the draft to all surfaces that intersect the selected surface.

Face out is one of the faces we chose on the Extrude boss.

All faces. Draft all surfaces other than the neutral plane and extrude from the neutral plane.

The inner face includes the faces on the three Extrud bosses.

Inner Face. Draft all inner surfaces extruded from neutral planes.

Outer Face. Draft all outer surfaces of the neutral plane to the outside.

Berbagi :