Modify Sketch

Use the Modify Sketch tool to move, rotate, or scale an entire sketch. To move, rotate, scale, or copy individual sketch entities, use the Move or Copy Entities, Rotate or Copy Entities, or Scale or Copy Entities tools.
To move a sketch:
1. Open a sketch or select a sketch in the FeatureManager design tree, and click Modify Sketch on the Sketch toolbar, or click Tools, Sketch Tools, Modify.
2. In the dialog box:
• To move the sketch geometry incrementally, under Translate, type a value for X value and Y value
and press Enter.
• To move a specified point of the sketch to a specific location, under Translate, select Position
selected point and click a point in the sketch. Type a value for X value and Y value and press
Enter.
The Modify Sketch tool translates the entire sketch geometry in relation to the model (including
the sketch origin). The sketch geometry does not move relative to the origin of the sketch.
- or -
• To move a sketch in the graphics area, use the pointer:
o Press the left-mouse button to move the sketch.
o Point at the end points or center of the black origin to display one of three flip symbols.
Right-click to flip the sketch on the X axis, the Y axis, or both.
3. Click Close.


SolidWorks 2004
Reference Guide

Read more........

Berbagi :